Application Summary
This profile documents a common municipal lagoon specification pattern: operators need to reduce exposed water surface, suppress algae growth, limit odor release, and avoid wind displacement without adding mechanical anchoring or permanent structures.
Problem Profile
- Seasonal algae growth increasing treatment burden and discharge-risk conversations
- Hydrogen sulfide and ammonia odor concerns near lagoon perimeters
- Open-water exposure where lightweight covers can drift or bunch under wind
- Need for access to the liquid surface without a fixed geomembrane cover system
Site Conditions Considered
- Open lagoon geometry with variable operating levels
- Municipal or industrial wastewater chemistry compatible with HDPE cover materials
- Operator preference for passive installation and low routine maintenance
- Surface-coverage requirement higher than standard ball covers can provide
Selection Logic
- 1 Specify up to 99% surface coverage where sunlight blockage and liquid-air interface reduction are the primary control mechanisms.
- 2 Use water-ballasted modular units where wind exposure is a design concern.
- 3 Keep the cover modular so operators can remove localized sections for inspection, sampling, aeration equipment, or repairs.
- 4 Reference AWTT technical data for product density, wind resistance, operating temperature, warranty, and expected service life.
Published, Verifiable Outcomes
- Hexprotect AQUA is published by AWTT as a water-ballasted hexagonal cover with up to 99% surface coverage.
- AWTT publishes a 130+ MPH wind-resistance rating for Hexprotect AQUA.
- AWTT product pages and technical data publish 25+ year expected life and a 10-year product warranty for modular floating covers.
- No customer-specific before/after odor, TSS, BOD, or complaint-rate measurements are published for this anonymized note.
Publication Disclosure
This public note is anonymized. It does not name the customer, facility, location, or private operating data. Outcome statements are limited to AWTT public technical specifications and selection logic unless a customer-approved project summary becomes available.